Description
Note: This is not our most current design. Only order this lid if you are needing to match previous lids that you ordered, as this one is more expensive and harder to assemble. Please look for the ET18 instead.
A 3D printed configurable replacement lid for an Exo Terra Small (18″ x 18″x 18″, 18″ x 18″ x 24″ and 18″ x 18″ x 36″) terrariums. This lid has one vent section which you can choose to place on the front or the back. The opening is 14″ x 12″. Due to the logistics of shipping glass, we DO NOT include the glass at this time. This glass will have to be cut to size, so you will need to purchase it yourself in order to use this lid. You may want to cut it 1/16″ smaller than the opening if you are not sure the cut will be precise. Some hardware stores like Lowe’s will cut glass for free. We do not suggest using acrylic because it is slightly flexible and we feel like with a lid this size you need something more solid. Because of the nature of our design, multiple glass thicknesses can be used.
Each vent section comes with three screens which are 3D printed plastic so they won’t rust and won’t catch any critter toes. The three vent ‘ports’ in each section make it possible to change screens to control humidity and more (see Port Accessories). Three mesh screens come standard, but if you would like solid screens (which allow no airflow) select that option. If you want a mix or some with misting nozzle holes, please leave a note in the personalization section saying what you would like. You would need to say if you want mesh or solid, and if you want no hole, center hole or side hole for each screen.
Each lid comes as a kit which you will need to assemble. The pieces snap together and come with instructions. There is also an assembly video you can view if needed.
